In a dry cooling tower, hot water flows inside the radiator tubes, cooling the water through contact heat transfer caused by the temperature difference between the water and the outside air. Therefore, the characteristics of a dry cooling tower are:
① There is no water evaporation loss, nor wind or sewage loss, making dry cooling towers suitable for water-scarce areas, such as northern my country. Because there is no evaporation, there is also no pollution caused by air being discharged from the cooling tower outlet.
② Cooling of water relies on contact heat transfer, with a cooling limit of the dry-bulb temperature of the air, resulting in low efficiency and high cooling water temperature.
③ A large number of metal pipes (aluminum or steel) are required, therefore the cost is 4 to 6 times that of a wet cooling tower of the same capacity. Due to the latter two disadvantages of dry cooling towers, wet towers should be used whenever possible in areas where conditions permit. Dry towers can use either natural or mechanical ventilation. Taking the dry cooling towers commonly used in thermal power plants as an example, they are divided into two categories: indirect cooling and direct cooling. Indirect cooling refers to using water cooled in the cooling tower to cool the exhaust steam exiting the turbine well in the condenser. Direct cooling refers to cooling the exhaust steam from the steam turbine directly into a cooling tower without using a condenser, turning it into condensate, which is then pumped back to the boiler for reuse.

