Round Type Cooling Tower (WYG-20T)
When 37°C Inlet Is Your Daily Reality - and You Want Low Operating Costs

The procurement problem
Most of your cooling demand is moderate - 37°C in, 32°C out. You do not need a heavy-duty high-temp tower. But you also do not want a cheap tower that leaks, rusts, or needs fan belt replacements every six months. You want the sweet spot: enough durability without over-specifying.
What this tower does differently
The WYG-20T Round Type Cooling Tower is built for this exact duty. The FRP shell means no rust - ever. The PVC fill and PVC water distribution pipe are standard, but we use a thicker grade than most competitors. The fan is 630 mm with nylon blades, direct-driven by a 0.37 kW motor. No belts, no tensioners, no replacement schedule. The basin is 1280 mm, the height is 2000 mm - compact enough for rooftop installations where space is tight.

A real installation in Zhejiang
A metal stamping plant with 12 presses installed this tower in early 2025. Their old tower used a belt-driven fan that needed new belts every 8 months. The maintenance manager tracked it: RMB 320 per belt change, plus 45 minutes of labor, twice a year. The WYG-20T eliminated that entirely. The plant also noted a 9% drop in pump energy because inlet pressure is only 16 kPa - their existing pump no longer runs at full capacity.
Why buyers choose this over cheaper alternatives
A lower-priced tower often uses hand-laid FRP with uneven thickness, or a belt drive that adds recurring costs, or a steel basin that rusts within five years. The WYG-20T avoids all three traps. You pay slightly more upfront, but you stop paying for maintenance and early replacement.


Technical Specifications
|
Parameter |
Value |
|
Cooling Tower Type |
Counter Flow Round Water Tower |
|
Model |
WYG-20T |
|
Cooling Water Flow Rate |
19.5 m³/h |
|
Inlet / Outlet Water Temperature |
37°C / 32°C |
|
Ambient Dry Bulb / Wet Bulb |
31.5°C / 27°C |
|
Cooling Capacity |
78,000 kcal/h |
|
Noise Level |
61 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Inlet Water Pressure |
16 kPa |
|
Net Weight / Operating Weight |
115 kg / 270 kg |
|
Fan Diameter |
630 mm (Nylon, 4 blades) |
|
Motor Power |
0.37 kW, Direct Drive |
|
Shell Material |
FRP |
|
Fill / Distribution Pipe |
PVC |
|
Basin Diameter / Tower Height |
1280 mm / 2000 mm |
|
Inlet / Outlet Pipe (DN) |
50 mm / 50 mm |
Hot Tags: round type cooling tower, China round type cooling tower manufacturers, suppliers, factory, Anti Scaling Round Cooling Tower, Counter Flow Type Cooling Tower, High Temperature Round Cooling Tower, Industrial Round Counter Flow Cooling Tower, round cooling tower, Round Type Cooling Tower

