Counter Flow Type Cooling Tower (WYG-40H)
A 60°C Inlet Tower That Actually Holds Its Rating

How we address it
This tower holds its rated performance because of what we did not cut corners on. The WYG-40H uses heat‑resistant nylon for the rotating head and PP for both the distribution pipe and fill. These materials do not soften at 60°C. We tested them. They stay rigid after years of hot water exposure. The fan is direct‑drive - no belts to stretch, no pulleys to misalign. The FRP shell is molded, not hand‑laid, so wall thickness is consistent and there are no weak spots. That consistency translates to predictable airflow and stable cooling.
A real installation in Jiangxi
A chemical intermediate plant replaced a failing tower with this model in mid‑2024. Their previous tower could not keep outlet water below 45°C on hot afternoons. The WYG‑40H delivers 40°C ± 0.5°C consistently. The plant's chiller compressor runs 30% less frequently now. Their annual energy saving: approximately RMB 18,000.

The procurement problem
You see a spec sheet claiming 624,000 kcal/h at 60°C inlet. But when the tower arrives and summer hits, the actual outlet temperature drifts. Your chillers work harder. Your energy bill climbs.
Why procurement teams choose this
You do not want to explain to production why the tower cannot meet spec. You do not want to justify an unbudgeted replacement three years from now. You want a Counter Flow Type Cooling Tower that does what the sheet says, year after year. This one does.


Technical Specifications
|
Parameter |
Value |
|
Cooling Tower Type |
Counter Flow Round Water Tower |
|
Model |
WYG‑40H |
|
Cooling Water Flow Rate |
31.2 m³/h |
|
Inlet / Outlet Water Temperature |
60°C / 40°C |
|
Ambient Dry Bulb / Wet Bulb |
31.5°C / 27°C |
|
Cooling Capacity |
624,000 kcal/h |
|
Noise Level |
62 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Inlet Water Pressure |
17 kPa |
|
Net Weight / Operating Weight |
230 kg / 580 kg |
|
Fan Diameter |
770 mm (Nylon, 4 blades) |
|
Motor Power |
0.75 kW, Direct Drive |
|
Shell Material |
Molded FRP |
|
Rotating Head |
Heat‑Resistant Nylon |
|
Fill / Water Pipe |
Heat‑Resistant PP |
|
Inlet / Outlet Pipe (DN) |
80 mm / 80 mm |
|
Tower Height / Basin Diameter |
2300 mm / 1680 mm |
Hot Tags: counter flow type cooling tower, China counter flow type cooling tower manufacturers, suppliers, factory, Anti Scaling Round Cooling Tower, Counter Current Cooling Tower, Counter Flow Type Cooling Tower, Energy Saving Round Cooling Tower, Large Capacity Round Cooling Tower, round cooling tower

