High Temperature Round Cooling Tower (WYG-30H)
Built for the 60°C Inlet That Kills Standard Towers

The procurement problem
Standard towers rated for 60°C often use materials that are not truly heat-stable. After one summer, the fill sags. The water distribution pipe warps. The rotating head seizes. Cooling performance drops, and you are shopping for replacements in year three.
What is actually different here
The WYG-30H High Temperature Round Cooling Tower uses heat-resistant nylon for the rotating head and heat-resistant PP for both the fill and water distribution pipe. These are not "standard grade" materials labelled as heat-resistant. We sourced them specifically for continuous 60°C operation. The center pipe is galvanized steel - not PVC, because PVC loses strength at this temperature. The shell is molded FRP, which does not warp under thermal cycling. The fan is 630 mm, nylon, direct-driven by a 0.55 kW motor. No belts.

A real installation in Fujian
A textile dyeing plant installed this tower in July 2024. Dyeing requires hot water loops that return at 58-60°C. Their previous tower lasted 27 months before the fill collapsed. The WYG-30H has been running for 15 months now. The maintenance supervisor measured fill thickness during a recent inspection - no measurable change. He told us: "The materials actually match the spec."
What this means for procurement
You are not just buying cooling capacity. You are buying a material guarantee. If the fill or rotating head fails within the warranty period due to heat degradation, we replace them - but based on our test data, you will not need to make that call.


Technical Specifications
|
Parameter |
Value |
|
Cooling Tower Type |
Counter Flow Round Water Tower |
|
Model |
WYG-30H |
|
Cooling Water Flow Rate |
23.4 m³/h |
|
Inlet / Outlet Water Temperature |
60°C / 40°C |
|
Ambient Dry Bulb / Wet Bulb |
31.5°C / 27°C |
|
Cooling Capacity |
390,000 kcal/h |
|
Noise Level |
61 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Inlet Water Pressure |
16 kPa |
|
Net Weight / Operating Weight |
165 kg / 380 kg |
|
Fan Diameter |
630 mm (Nylon, 4 blades) |
|
Motor Power |
0.55 kW, Direct Drive |
|
Shell Material |
Molded FRP |
|
Center Pipe |
Galvanized Steel |
|
Rotating Head |
Heat-Resistant Nylon |
|
Fill / Distribution Pipe |
Heat-Resistant PP |
|
Basin Diameter / Tower Height |
1390 mm / 2280 mm |
|
Inlet / Outlet Pipe (DN) |
50 mm / 50 mm |
Hot Tags: high temperature round cooling tower, China high temperature round cooling tower manufacturers, suppliers, factory, Anti Scaling Round Cooling Tower, Counter Current Cooling Tower, Energy Saving Round Cooling Tower, High Temperature Round Cooling Tower, round cooling tower, Small Round Cooling Tower


