News

Dry Cooling Tower Classification

May 18, 2026 Leave a message

Dry cooling towers can utilize either natural or mechanical ventilation. Based on whether they directly cool the process fluid, they can be categorized into indirect and direct cooling. Indirect cooling involves first cooling the process equipment's cooling water in the cooling tower, and then using this cooled water to cool the process fluid. Direct cooling involves introducing the process fluid to be cooled into the cooling tower via pipes.

 

Direct Dry Cooling System: Generally, air for condenser exhaust is supplied by a forced draft. The condenser consists of numerous finned tube bundles. Large air-cooled condensers and fans are located 20–45 m above the turbine, outside the turbine, without affecting the transformer and outgoing lines.

 

Indirect Dry Cooling System: In this system, the condenser is still located below the turbine. The heated cooling water is sent to a closed cooler located around the air inlet of the natural draft cooling tower or inside the tower. After being cooled, it flows back to the condenser for reuse.

 

news-800-800

Send Inquiry