Anti Scaling Round Cooling Tower (WYG-100H)
Designed for Hard Water · Reduced Scale Build-Up · Lower Maintenance Frequency

The Challenge: Scale Is a Maintenance Nightmare
If your facility uses hard water, you know the problem. Scale builds up on fill material. Scale builds up on the water distribution system. Scale reduces cooling efficiency. Scale clogs nozzles. Scale forces you to shut down for cleaning. Scale costs you money. The Anti Scaling Round Cooling Tower (WYG-100H) is designed for hard water areas. It uses hot-dip galvanized steel for the water distribution system. It uses heat-resistant nylon for components exposed to high temperatures. It is built to resist scale formation and reduce maintenance frequency.
Real-World Case: Plastics Plant in Hebei
A plastics plant in Hebei Province uses well water with high mineral content. Their previous tower required cleaning every 45 days. Scale build-up reduced cooling efficiency by 15%. The WYG-100H was installed in January 2025. The plant manager reports that after 9 months of operation, scale build-up is minimal. The first cleaning was performed at 6 months - four times longer than the previous tower. Cooling efficiency has remained stable.
"We were cleaning our old tower every month. This tower ran for six months before we needed to clean it. That's a huge difference in labor cost and downtime."
- Mr. Zhang, Plant Manager
(Maintenance logs are available upon request.)

Core Performance Specifications
|
Parameter |
Value |
|
Cooling Water Flow Rate |
90 m³/h |
|
Inlet / Outlet Water Temperature |
60℃ / 40℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
390,000 kcal/h |
|
Noise Level |
64 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
21 kPa |
|
Net Weight / Operating Weight |
700 kg / 1600 kg |
Why Does the WYG-100H Resist Scale?
Hot-Dip Galvanized Steel Water Distribution
The water distribution pipe and center pipe are hot-dip galvanized steel. The hot-dip galvanizing process creates a thick, uniform zinc coating. This coating prevents scale from adhering to the pipe surface. Scale that does not adhere is washed away by the water flow. The smooth galvanized surface also resists corrosion. Standard steel pipes have rough surfaces that promote scale formation. Galvanized steel is smoother. Scale has less surface area to grip.
Heat-Resistant Nylon Components
The float ball and rope joint are made of heat-resistant nylon. These materials do not degrade in 60℃ water. They do not corrode. They maintain their mechanical properties over time. This reduces the need for replacement parts.
PPC Fill Material
The fill material is heat-resistant PPC. PPC is resistant to scale formation. Scale does not easily adhere to PPC surfaces. The fill material maintains its surface area for heat exchange. Cooling efficiency does not degrade as quickly.
Aluminum Alloy Fan
The fan is aluminum alloy. It is lightweight and corrosion-resistant. It does not rust. It does not require painting. It maintains aerodynamic efficiency over time.
Why This Matters for Your Operation
Scale costs you money in three ways. It reduces cooling efficiency. It forces maintenance shutdowns. It causes premature component failure. The WYG-100H is designed to reduce all three costs. Less scale means better efficiency. Less scale means fewer shutdowns. Less scale means longer component life. This tower is built to work in hard water conditions.


About Us - A Cooling Equipment Manufacturer You Can Trust
|
Key Metric |
Data |
|
Total Customers Served |
Over 5,600 |
|
2025 Annual Sales |
Exceeded RMB 29 million |
|
Payment Collection Rate |
98.2% |
|
Since |
2010 |
Complete Technical Specification Table
|
Parameter |
Value |
|
Cooling Tower Type |
Counter Flow Round Water Tower |
|
Model |
WYG-100H |
|
Cooling Water Flow Rate |
90 m³/h |
|
Inlet / Outlet Water Temperature |
60℃ / 40℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
390,000 kcal/h |
|
Noise Level |
64 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Water Quality Requirement |
pH 6 – 8 |
|
Air-to-Water Ratio |
0.62 kg/kg |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
21 kPa |
|
Net Weight / Operating Weight |
700 kg / 1600 kg |
|
Fan Type |
Axial Flow |
|
Air Volume |
42,900 m³/h |
|
Fan Diameter |
1450 mm |
|
Number of Blades |
4 per set |
|
Drive Method |
Direct Drive |
|
Motor Power |
2.2 kW-8 |
|
Motor Start Method |
Direct Start |
|
Water Basin Diameter (D) |
2900 mm |
|
Tower Height (H) |
3260 mm |
|
Inlet / Outlet Pipe Size (DN) |
125 mm / 125 mm |
|
Overflow / Drain Pipe Diameter (DN) |
50 mm / 50 mm |
|
Automatic / Manual Make-up Size (DN) |
20 mm / None |
|
Fan Material |
Aluminum Alloy |
|
Shell Material |
Molded FRP |
|
Center Pipe Material |
Hot-Dip Galvanized Steel |
|
Rotating Head Material |
Aluminum Alloy |
|
Water Distribution Pipe Material |
Hot-Dip Galvanized Steel |
|
Fill Material |
PPC Heat-Resistant |
|
Float Ball Material |
Heat-Resistant Nylon |
|
Rope Joint Material |
Heat-Resistant Nylon |
|
Air Intake System Material |
PVC |
Hot Tags: anti scaling round cooling tower, China anti scaling round cooling tower manufacturers, suppliers, factory, Anti Scaling Round Cooling Tower, Counter Current Cooling Tower, High Temperature Round Cooling Tower, Large Capacity Round Cooling Tower, Round Type Cooling Tower, Small Round Cooling Tower


