Large Capacity Round Cooling Tower (WYG-200T)
High Flow Rate · Massive Cooling Capacity · Industrial Grade Reliability

The Challenge: Cooling for Large Industrial Operations
If your facility processes 150+ m³/h of cooling water, you need a tower that can handle that volume. You need a tower that does not choke under load. You need a tower that can run continuously without failure. The Large Capacity Round Cooling Tower (WYG-200T) moves 156 m³/h of water. It delivers 780,000 kcal/h of cooling capacity. It has a fan diameter of 1800 mm and a motor of 4 kW-8. It is built for large industrial operations.
Real-World Case: Chemical Processing Plant in Jiangxi
A chemical processing plant in Jiangxi Province installed two WYG-200T units in July 2024 to replace four smaller aging towers. The old towers could not keep up with summer heat loads. Outlet water temperature would rise to 35℃ on hot days, affecting reaction yields. The new towers maintain outlet temperature at 32℃ year-round. Production yield increased by 4% after installation. The plant manager reports that the towers have run continuously for over 11 months without any failure.
"Our old towers couldn't handle summer. We had to slow down production. These new towers don't break a sweat. Our yield improved, and our operators are much happier."
- Mr. Fang, Production Manager
(Operational data is available upon request.)

Core Performance Specifications
|
Parameter |
Value |
|
Cooling Water Flow Rate |
156 m³/h |
|
Inlet / Outlet Water Temperature |
37℃ / 32℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
780,000 kcal/h |
|
Noise Level |
65 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
30 kPa |
|
Net Weight / Operating Weight |
915 kg / 2315 kg |
Why Does the WYG-200T Handle High Flow Rates?
Massive 1800 mm Fan
The fan diameter is 1800 mm. It moves 85,800 m³/h of air. That is enough air to exchange the air volume of a large warehouse multiple times per hour. The fan has 4 aluminum alloy blades. They are lightweight, strong, and corrosion-resistant. The motor is 4 kW-8 with direct drive. No belts to slip. No belts to replace. Direct power transmission from motor to fan.
Large Diameter Basin
The water basin diameter is 3300 mm. This large basin holds enough water to maintain stable flow even during surges. The tower height is 3450 mm. The inlet pipe is DN140. The outlet pipe is DN160. These large pipe sizes reduce flow resistance and allow high-volume water movement.
Aluminum Alloy Rotating Head
The rotating head is aluminum alloy. This material is corrosion-resistant and lightweight. It ensures even water distribution across the fill material. Even distribution means all fill material is used for cooling. No wasted fill surface area.
Why This Matters for Your Operation
If your plant has a large cooling requirement, you need a tower that can meet that requirement without failure. The WYG-200T is built for continuous operation. The large fan moves enough air to cool high-volume water flow. The large pipes handle high flow rates without restriction. The aluminum alloy components resist corrosion. This tower is built to run 24/7/365.


About Us - A Cooling Equipment Manufacturer You Can Trust
|
Key Metric |
Data |
|
Total Customers Served |
Over 5,600 |
|
2025 Annual Sales |
Exceeded RMB 29 million, up 20.5% YoY |
|
New Customers in 2025 |
1,200+ |
|
Since |
2010 |
Complete Technical Specification Table
|
Parameter |
Value |
|
Cooling Tower Type |
Counter Flow Round Water Tower |
|
Model |
WYG-200T |
|
Cooling Water Flow Rate |
156 m³/h |
|
Inlet / Outlet Water Temperature |
37℃ / 32℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
780,000 kcal/h |
|
Noise Level |
65 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Water Quality Requirement |
pH 6 – 8 |
|
Air-to-Water Ratio |
0.62 kg/kg |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
30 kPa |
|
Net Weight / Operating Weight |
915 kg / 2315 kg |
|
Fan Type |
Axial Flow |
|
Air Volume |
85,800 m³/h |
|
Fan Diameter |
1800 mm |
|
Number of Blades |
4 per set |
|
Drive Method |
Direct Drive |
|
Motor Power |
4 kW-8 |
|
Motor Start Method |
Direct Start |
|
Water Basin Diameter (D) |
3300 mm |
|
Tower Height (H) |
3450 mm |
|
Inlet / Outlet Pipe Size (DN) |
140 mm / 160 mm |
|
Overflow / Drain Pipe Diameter (DN) |
50 mm / 50 mm |
|
Automatic / Manual Make-up Size (DN) |
25 mm / 25 mm |
|
Fan Material |
Aluminum Alloy |
|
Shell Material |
Molded FRP |
|
Center Pipe Material |
PVC |
|
Rotating Head Material |
Aluminum Alloy |
|
Water Distribution Pipe Material |
PVC |
|
Fill Material |
PVC |
|
Float Ball Material |
Nylon |
|
Rope Joint Material |
Nylon |
|
Air Intake System Material |
PVC |
Hot Tags: large capacity round cooling tower, China large capacity round cooling tower manufacturers, suppliers, factory, Anti Scaling Round Cooling Tower, Counter Current Cooling Tower, Counter Flow Type Cooling Tower, High Temperature Round Cooling Tower, Industrial Round Counter Flow Cooling Tower, Large Capacity Round Cooling Tower

