FRP Round Cooling Tower (WYG-40T)
Best Value · Corrosion-Proof FRP Shell · Easy Installation

The Challenge: Getting Reliable Cooling Without Overspending
Not every project needs the highest-end features. Some buyers need a reliable, cost-effective tower that does the job without unnecessary extras. The FRP Round Cooling Tower (WYG-40T) is our best value product. It delivers 31.2 m³/h of water flow. It provides 156,000 kcal/h of cooling capacity. It uses the same molded FRP shell as our premium models. But it is priced for budget-conscious buyers.
Real-World Case: Small Manufacturing Plant in Anhui
A small manufacturing plant in Anhui Province needed a new cooling tower for their injection molding machines. They had a limited budget. They needed a tower that would last but did not require premium features. The WYG-40T was installed in October 2024. The plant owner reported that the tower was easy to install - their maintenance team had it running in one day. The tower has been running reliably since installation. No issues. No complaints.
"We needed a tower that worked, and we needed it to be affordable. This tower delivered both. Installation was simple, and it has been running without any problems."
- Mr. Zhao, Plant Owner
(Installation photos are available upon request.)

Core Performance Specifications
|
Parameter |
Value |
|
Cooling Water Flow Rate |
31.2 m³/h |
|
Inlet / Outlet Water Temperature |
37℃ / 32℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
156,000 kcal/h |
|
Noise Level |
62 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
17 kPa |
|
Net Weight / Operating Weight |
230 kg / 580 kg |
Why Is the WYG-40T the Best Value?
Molded FRP Shell
The shell is made of molded FRP. This is the same material used in our premium models. It does not rust. It resists corrosion. It is lightweight but strong. The molding process creates a seamless shell with consistent thickness and strength. No weak points. No leaks. No rust.
Standardized Design
This is our most standardized product. The design has been refined over years of production. The components are proven. The assembly process is efficient. Standardization means lower cost. Lower cost means better value for you.
Direct Drive Simplicity
The fan uses direct drive. No belts. No pulleys. No tension adjustments. The motor connects directly to the fan. This simplifies maintenance and reduces operating costs. The motor is 0.75 kW with direct start. It draws power when needed and stops when not needed.
Low Water Pressure
Inlet water pressure is only 17 kPa. This means your pump does not need to work as hard. Lower pump pressure means lower pump energy consumption. Lower pump energy consumption means lower electricity bills.
Why This Matters for Your Operation
If you need a cooling tower but have budget constraints, the WYG-40T is the right choice. It gives you the core functionality you need without premium add-ons. The molded FRP shell ensures long life. The direct drive motor simplifies maintenance. The low inlet pressure saves energy. You get reliable cooling at a reasonable price.


About Us - A Cooling Equipment Manufacturer You Can Trust
|
Key Metric |
Data |
|
Total Customers Served |
Over 5,600 |
|
2025 Annual Sales |
Exceeded RMB 29 million, up 20.5% YoY |
|
Active Customer Rate |
65% |
|
Since |
2010 |
Complete Technical Specification Table
|
Parameter |
Value |
|
Cooling Tower Type |
Counter Flow Round Water Tower |
|
Model |
WYG-40T |
|
Cooling Water Flow Rate |
31.2 m³/h |
|
Inlet / Outlet Water Temperature |
37℃ / 32℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
156,000 kcal/h |
|
Noise Level |
62 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Water Quality Requirement |
pH 6 – 8 |
|
Air-to-Water Ratio |
0.62 kg/kg |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
17 kPa |
|
Net Weight / Operating Weight |
230 kg / 580 kg |
|
Fan Type |
Axial Flow |
|
Air Volume |
17,160 m³/h |
|
Fan Diameter |
770 mm |
|
Number of Blades |
4 per set |
|
Drive Method |
Direct Drive |
|
Motor Power |
0.75 kW |
|
Motor Start Method |
Direct Start |
|
Water Basin Diameter (D) |
1680 mm |
|
Tower Height (H) |
2300 mm |
|
Inlet / Outlet Pipe Size (DN) |
80 mm / 80 mm |
|
Overflow / Drain Pipe Diameter (DN) |
25 mm / 25 mm |
|
Automatic / Manual Make-up Size (DN) |
15 mm / None |
|
Fan Material |
Nylon |
|
Shell Material |
Molded FRP |
|
Center Pipe Material |
PVC |
|
Rotating Head Material |
Nylon |
|
Water Distribution Pipe Material |
PVC |
|
Fill Material |
PVC |
|
Float Valve Material |
Nylon |
|
Rope Joint Material |
Nylon |
|
Air Intake System Material |
PVC |
Hot Tags: frp round cooling tower, China frp round cooling tower manufacturers, suppliers, factory, Counter Current Cooling Tower, FRP Round Cooling Tower, High Temperature Round Cooling Tower, Large Capacity Round Cooling Tower, Round Type Cooling Tower, Small Round Cooling Tower

