Small Round Cooling Tower (WYG-10T)
Compact Size · Ultra Low Noise · Minimal Space Requirements

The Challenge: Cooling in Tight Spaces
Not every facility has acres of open space. Some plants are in urban areas where floor space is expensive. Some cooling needs are small - a single machine, a small lab, a compact production line. Standard cooling towers are too large. They take up space you do not have. They move more water than you need. The Small Round Cooling Tower (WYG-10T) is built for these situations. It has a footprint of only 1190 mm diameter. It weighs only 60 kg when empty. It fits where larger towers cannot.
Real-World Case: University Research Laboratory in Shanghai
A university research laboratory in Shanghai needed cooling for a small pilot plant. The available space was a 2 meter × 2 meter corner of the lab roof. The noise limit for the area was 65 dB(A). Standard towers were too large. The WYG-10T was installed in February 2025. It fit within the 2 m × 2 m space with room to spare. Noise testing measured 60 dB(A) - well below the 65 dB(A) limit. The lab director reported that the tower runs quietly enough that researchers can work next to it without distraction.
"We didn't think we could fit a cooling tower in that corner. This one fit perfectly, and it's so quiet we forget it's there."
- Dr. Wu, Laboratory Director
(Installation photos are available upon request.)

Core Performance Specifications
|
Parameter |
Value |
|
Cooling Water Flow Rate |
7.8 m³/h |
|
Inlet / Outlet Water Temperature |
37℃ / 32℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
39,000 kcal/h |
|
Noise Level |
60 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
13 kPa |
|
Net Weight / Operating Weight |
60 kg / 150 kg |
Why Does the WYG-10T Work in Tight Spaces?
Compact Footprint
The water basin diameter is only 1190 mm. The tower height is 1750 mm. This is one of the smallest cooling towers available in the industrial category. It fits in corners, on rooftops with limited space, and in equipment rooms. The small footprint does not mean small performance. It handles 7.8 m³/h of water flow and provides 39,000 kcal/h of cooling capacity.
Ultra Low Noise
The noise level is only 60 dB(A). This is the quietest model in our entire product line. The 550 mm fan operates at low speed. The motor is only 0.18 kW-6. Low power consumption means low noise. Low noise means it can be installed near offices, laboratories, and other noise-sensitive areas without causing complaints.
Lightweight Construction
The net weight is only 60 kg. The operating weight (with water) is 150 kg. This is light enough to be installed on rooftops without additional structural reinforcement. It can be moved with a pallet jack or small forklift. It does not require heavy lifting equipment for installation.
Why This Matters for Your Operation
If you have a small cooling need, you should not have to buy a large tower. Large towers cost more to buy, more to install, and more to operate. The WYG-10T matches your need. It costs less. It fits in smaller spaces. It uses less electricity. It generates less noise. It is the right tool for the right job.
Design Team & Technical Background
This product is designed for small-scale applications. Our engineering team focused on minimizing footprint and noise while maintaining reliable cooling performance. The result is a tower that fits where others do not.


About Us - A Cooling Equipment Manufacturer You Can Trust
|
Key Metric |
Data |
|
Total Customers Served |
Over 5,600 |
|
2025 Annual Sales |
Exceeded RMB 29 million, up 20.5% YoY |
|
Since |
2010 |
After-Sales Service & Commitment
|
Service Item |
Commitment |
|
Warranty |
One-year comprehensive warranty |
|
Response Time |
48-hour response |
|
Shipping Damage |
Free replacement parts |
Complete Technical Specification Table
|
Parameter |
Value |
|
Cooling Tower Type |
Counter Flow Round Water Tower |
|
Model |
WYG-10T |
|
Cooling Water Flow Rate |
7.8 m³/h |
|
Inlet / Outlet Water Temperature |
37℃ / 32℃ |
|
Ambient Dry Bulb / Wet Bulb Temperature |
31.5℃ / 27℃ |
|
Cooling Capacity |
39,000 kcal/h |
|
Noise Level |
60 dB (A) |
|
Power Supply |
380V / 3P / 50Hz |
|
Water Quality Requirement |
pH 6 – 8 |
|
Air-to-Water Ratio |
0.62 kg/kg |
|
Drift Loss |
≤ 0.02% |
|
Evaporation Loss |
≤ 0.83% |
|
Inlet Water Pressure |
13 kPa |
|
Net Weight / Operating Weight |
60 kg / 150 kg |
|
Fan Type |
Axial Flow |
|
Air Volume |
4,290 m³/h |
|
Fan Diameter |
550 mm |
|
Number of Blades |
4 per set |
|
Drive Method |
Direct Drive |
|
Motor Power |
0.18 kW-6 |
|
Motor Start Method |
Direct Start |
|
Water Basin Diameter (D) |
1190 mm |
|
Tower Height (H) |
1750 mm |
|
Inlet / Outlet Pipe Size (DN) |
40 mm / 40 mm |
|
Overflow / Drain Pipe Diameter (DN) |
40 mm / 40 mm |
|
Automatic / Manual Make-up Size (DN) |
25 mm / 25 mm |
|
Fan Material |
Nylon |
|
Shell Material |
FRP |
|
Center Pipe Material |
PVC |
|
Rotating Head Material |
Nylon |
|
Water Distribution Pipe Material |
PVC |
|
Fill Material |
PVC |
|
Float Valve Material |
Nylon |
|
Rope Joint Material |
Nylon |
|
Air Intake System Material |
PVC |
Hot Tags: small round cooling tower, China small round cooling tower manufacturers, suppliers, factory, Counter Flow Type Cooling Tower, Energy Saving Round Cooling Tower, FRP Round Cooling Tower, Industrial Round Counter Flow Cooling Tower, Large Capacity Round Cooling Tower, Round Type Cooling Tower



